I-TEL 2+ Automatic Dialing System

Automatic dial, alert and alarm system with voice confirmation

Description I-Tel 2+ Automatic Dialing System 

The I-TEL 2+ Automatic Dialing System can be used wherever emergency situations are to be registered and automatically reported: In case of burglary, fire, water damages, gas leaks, power failure, malfunctioning of technical installations etc. I-TEL 2+ can also be used as an integral part of an existing alarm system.

In nursing- and geriatric care, the Automatic Dialing System can also be used as an emergency alarm.

I-TEL 2+ is operated from a fixed network connection and can either be a main line or an extension. Pre-programmed call numbers are connected and a freely spoken message is transferred.

I-TEL 2+ Automatic Dialing System is also available as a module for installation or ISDN connection.

Technical Specifications I-Tel 2+ Automatic Dialing System

• Terminal equipment for connection to an analogue line with TAE-N-plug
• Up to four target directory numbers
• Length of announcement max. 35 sec.
• Tone dialling (MFV 100 ms tone, dialling interval 180 ms) and flash (100 ms)
• Call-charge pulse 16 kHz, minimum 80 ms / 20 mV
• Power supply external ac-adapter 9 V~ (optional)
• Back-up power by our emergency power supply (optional) or 12 V= (10 – 14 V) / appr. 100 mA respectively
• Report input: at zero potential, as normally open or break contact or as intelligent terminal
• Ambient temperature (operating temp.) 0 .. 35° C
• Ambient temperature (storage) -25 .. 70° C
• Ambient closed interior space (special execution in IP 56-protective casing possible)
• Relative air humidity 20 .. 75 % (non-condensing)
• Dimensions 195 × 140 × 50 mm
• Weight 450 g
• EU Certification of the Automatic Dialing System
• CE marking (R & TTE-, EMV-, Low Voltage Directive)

Product gallery - click to enlarge picture.